2017 express l6 won't go after jacking with reverse beeper switch
i went to unplug the reverse beeper and plug in some led lights I have mounted out back. the beeper is quite annoying and reverse lights would almost serve the same purpose (in my mind). i must have shorted something, it won't go now. I put everything back as it was, but there's no 12v at the reverse switch now. all fuses on the panel near the battery are good. is there another fuse panel somewhere?
any help appreciated, greg |
Re: 2017 express l6 won't go after jacking with reverse beeper switch
found the fuse under the cover and we're all good now.
even got the reverse lights working. |
Re: 2017 express l6 won't go after jacking with reverse beeper switch
The beeper is to let the driver know which way he's going more than people around cart.
|
Re: 2017 express l6 won't go after jacking with reverse beeper switch
Quote:
|
Re: 2017 express l6 won't go after jacking with reverse beeper switch
Quote:
Mine is on the front wall of the engine compartment passenger side. |
Re: 2017 express l6 won't go after jacking with reverse beeper switch
Thanks,Mr.bolt
|
All times are GMT -5. The time now is 04:00 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.