DS 48V Series - Click No Go
 

So, 48v Series DS, all new batteries, 2 gauge cables, HD F&R, HD Solenoid, 700 amp FSIP controller, etc.

Been running good since the rebuild a couple months ago. Tonight coming into the driveway it just quit. Solenoid clicks in F or R, battery gauge reads good power, it was just charged, just doesn't move in forward or reverse.

What are the top items I should look for when troubleshooting in the am?

TIA!

Re: DS 48V Series - Click No Go
 

Disregard, I figured it out. The lug on the very bottom of the FR switch had heated up due to the nut becoming loose and heated up the solder and shrink tube enough to drop the cable. Torched it back on and used some loctite blue on the connection.