| Nflight |
03-11-2021 06:59 PM |
Need Help Rewiring 1995 Fairway Villager
I have a 1995 Club Car Fairway Villager that I am trying to restore and flip. The F/R mechanical switch is very worn so I thought it would be nice to install a push button FNR switch with a reverse contactor. I have drawn up a schematic and was hoping someone may could look it over and see if I am planning everything correctly. I need to use the stock controller which is a Curtis 1204-411. The solenoid is a Curtis SW80-2028P. I have removed the OBC and am going to utilize a smart charger. The motor is bad and I am planning on replacing it with a compatible D&D motor. Nothing fancy. Anyways, I would really appreciate it if you could look over what I drew out and give me your opinion. Excuse my drawing, I am not an artist and have actually never drawn a schematic. I also only had a limited number of colored pens. Any wire with the color written beside it is a 2 gage and all the others will be at least 14 gage. Thank you in advance, I look forward to hearing from you.
https://drive.google.com/file/d/1AbE...w?usp=drivesdk |
