Hitachi GSB107 Starter/ Generator
Looking for a video or instructions pertaining to the dissasembly and testing of this Starter/Generator from my 95 Medalist. How do I tell if I have a GSB107- ? or ??. Apparently there are more than 1 dash number of these.
Thanks, Wayne |
Re: Hitachi GSB107 Starter/ Generator
Took it apart. Brushes are worn out. Not sure how to check the armature. Are the commutator bars connected to each other or are they supposed to be isolated from each other. I kinda think each one should have a partner 180 degrees away but don't know for sure. Any help is appreciated.
|
Re: Hitachi GSB107 Starter/ Generator
Before I order brushes I would like to check out the armature. Can I do this with an ohm meter or do I need to take it to a starter/alternator repair shop?
|
Re: Hitachi GSB107 Starter/ Generator
I'd clean the armature with some scotch bright if you have no signs of arching and install the new brushes. Stay away from sand paper or emery unless you clean it totally to remove any paper shavings.
LOU |
Re: Hitachi GSB107 Starter/ Generator
Brushes fixed it. Starts great and even seems to run better.
|
Re: Hitachi GSB107 Starter/ Generator
:thumbup:
LOU |
All times are GMT -5. The time now is 09:53 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.