|
Club Car DS Headlights Infographic
1 Attachment(s)
I created an info graphic showing the differences between the cowls on older (1981-1992) and newer (1993-up) Club Car DS carts. Might help someone with an older cart who is wondering why most light/turn signal kits for sale only list for 1993-up.
http://i148.photobucket.com/albums/s...a/CCLights.jpg |
Re: Club Car DS Headlights Infographic
Stickied! :thumbup:
|
Re: Club Car DS Headlights Infographic
Thanks Lockman!
Here's an image of my own cart after my turn signal/headlight install. It's a 1987 DS with the original front cowl (it's the cart I used in the infographic above to show the older cowl). I used the aftermarket style headlights with the oversize bezel and trimmed it to fit the body line. http://i148.photobucket.com/albums/s...a/IMG_8006.jpg |
Re: Club Car DS Headlights Infographic
Here's the only good image I could find that shows the smaller-style headlights I mentioned that were made to fit the 1981-1992 front cowls. This is from the cover of the 1986-1991 Club Car DS service manual:
http://i148.photobucket.com/albums/s...991%20CCDS.jpg |
Re: Club Car DS Headlights Infographic
Thanks for making it a sticky. I have found these on amazon and look very close to my factory ones. Would these work ?
|
Re: Club Car DS Headlights Infographic
Yes, from what I can see those appear to be the smaller headlights that will fit the older fronts like ours with no modifications to the headlight (you still have to cut holes in your cowl, of course).
|
Re: Club Car DS Headlights Infographic
Springbok, I really appreciate the help you have given me about my clubcar. Do you happen to know what bulbs are used in the headlight and taillight assemblies.
|
Re: Club Car DS Headlights Infographic
I don't know that they're all the same. So you'll just have to see what you get when your lights arrive.
|
Re: Club Car DS Headlights Infographic
Springbok, what did you use to cut down the bezel on the headlight frame? I am thinking I want the larger headlights and already have the kit. Will I use the template that comes with the kit to cut my holes? Thanks! :?
|
Re: Club Car DS Headlights Infographic
I used a Dremel with a small cutting wheel attachment (maybe 1.5" in diameter). Whether or not the larger headlights will fit depends on the style of front cowl you have as shown in the infographic.
|
| All times are GMT -5. The time now is 06:19 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.