Re: 13hp clone
 

Okay I need some help guys. I have a 1995 Club Car. Purchased one of those clone motors to replace my FE290. I'm running into a slight problem... The shaft on the clone is 1" and not long enough to support the current clutch I have. The previous shaft is 7/8 and much longer. Any suggestions???

I'd like to get this thing on the road and running! 4x4 you had some options, but you didn't go into detail. Can you help?

Re: 13hp clone
 

you will probably need a clutch to fit the 1" square end shaft , or
have your shaft machined to fit the clutch . I got my 1" clutch from cart parts plus they are a sponcer here . I am going today to pick up my first club car , with a bad engine , already have a 13 clone sitting and waiting to go in .

Re: 13hp clone
 

Goat53 is correct...you will need a clutch for the straight (not tapered) shaft.

I have a 16 hp clone with a Comet 780 from CPP. Call Tom, he will set you up.

I think the last time I checked it just under 200.00.

Good Luck,
Bryan

Re: 13hp clone
 

I saw the 16hp clone on ebay go for under $200 ($79 shipping). I was all over it until I learned of the counterclockwise rotation...But should fit the older CC and ezgo. How is it working out for you?

Re: 13hp clone
 

Dang I wish I knew that I needed a clutch. I would have ordered it. I was stoked to get this thing on the road this weekend.

Well I'll call Tom and see what I can come up with.

Thanks for your help everyone.

Re: 13hp clone
 

scottyb,
I have a G9 and it has worked out fine.

I gave 374.00 for mine from Ca.

The brand name on mine is Power Mate


Bryan

Re: 13hp clone
 

Just ordered the clutch from Tom.

I'm hoping that's all I need. . Can anyone think of anything else that I will need?

Re: 13hp clone
 

That should be it. :thumbup:

Re: 13hp clone
 

You guys sure have me interested in these clones as I can't fork over the greebacks either. I'm thinkng of the 16 Hondaish in a 96 CC. Two questions for now>>>

1. What exhaust are you guys running on the clones?

2. How many RPM are getting out of them?

Re: 13hp clone
 

This ebay listing shows all the specs for this 16hp motor. Listing 16hp @3600 rpm. I don't think they are all the same. Besure rotaion is compatable...

http://cgi.ebay.com/ws/eBayISAPI.dll...EOIBSA:US:1123