Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Gas Columbia ParCar (https://www.buggiesgonewild.com/forumdisplay.php?f=82)
-   -   columbia lift (https://www.buggiesgonewild.com/showthread.php?t=14444)

basshawk 03-27-2009 10:01 PM
columbia lift
 
has anyone tried a club car lift on thier columbia car they look like the front suspension are very close to each other

dirtysouth 03-28-2009 01:04 AM
Re: columbia lift
 
Similar, but not the same.:thumbup:

basshawk 03-28-2009 08:04 AM
Re: columbia lift
 
thanks for the info

dirtysouth 03-28-2009 02:55 PM
Re: columbia lift
 
Quote:
Originally Posted by basshawk (Post 167607)
thanks for the info
No problem.:thumbup: We made a few for a dealer based off of the Club Car spindle lift. Brackets on front were similar. The rear lift was completely different. The volume wasn't big enough to continue the project...

dirtysouth 03-28-2009 03:00 PM
Re: columbia lift
 
Quote:
Originally Posted by dirtysouth (Post 167769)
No problem.:thumbup: We made a few for a dealer based off of the Club Car spindle lift. Brackets on front were similar. The rear lift was completely different. The volume wasn't big enough to continue the project...
I saw one lift made with blocks. If I remember correctly it was 2 inch tubing in between the front spring and the frame. Seemed easy enough to fab and the cart had 22's under it... Not sure on the back.

basshawk 03-28-2009 07:40 PM
Re: columbia lift
 
thank you for the info


All times are GMT -5. The time now is 10:15 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.