Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Members Rides (https://www.buggiesgonewild.com/forumdisplay.php?f=20)
-   -   94 EZGO start to finish (https://www.buggiesgonewild.com/showthread.php?t=292)

Xtreme Cartz 01-10-2007 05:01 PM

94 EZGO start to finish
 
I just finished my 94 EZGO. :cheers: All I have to do is clean it up real good, wire the top light and sell it. :-D Some info on the wheels and tires. They are new take offs from a Yamaha rhino. I have 1.3" wheel adapters on it.

How much should I be able to get for this cart?

Here are pictures from start to finish.




http://www.buggiesgonewild.com/phpBB..._MVC004S_4.jpg

http://www.buggiesgonewild.com/phpBB..._MVC007S_2.jpg

http://www.buggiesgonewild.com/phpBB..._MVC008S_2.jpg

Notic the roof is out of wack. :arrow:
http://www.buggiesgonewild.com/phpBB..._MVC011S_3.jpg

http://www.buggiesgonewild.com/phpBB..._MVC012S_2.jpg

http://www.buggiesgonewild.com/phpBB..._MVC013S_3.jpg

http://www.buggiesgonewild.com/phpBB..._MVC014S_2.jpg

http://www.buggiesgonewild.com/phpBB..._MVC016S_1.jpg

http://www.buggiesgonewild.com/phpBB..._MVC017S_1.jpg

http://www.buggiesgonewild.com/phpBB..._MVC020S_1.jpg

http://www.buggiesgonewild.com/phpBB..._MVC021S_2.jpg


The tear down :arrow:
http://www.buggiesgonewild.com/phpBB..._MVC022S_2.jpg

http://www.buggiesgonewild.com/phpBB..._MVC030S_2.jpg

http://www.buggiesgonewild.com/phpBB..._MVC031S_2.jpg

After :arrow:
http://www.buggiesgonewild.com/phpBB..._MVC008S_4.jpg

http://www.buggiesgonewild.com/phpBB..._MVC009S_3.jpg

http://www.buggiesgonewild.com/phpBB..._MVC011S_5.jpg

http://www.buggiesgonewild.com/phpBB..._MVC012S_4.jpg

http://www.buggiesgonewild.com/phpBB..._MVC013S_7.jpg

TheNewGuy 01-10-2007 05:59 PM

Nice job!!! the cart looks good 8) 8) :-D :-D

NO NO NO E-Z-GO! 01-10-2007 06:01 PM

I'd say you could get $4,200 easily. It looks brand new, but the manufacturer code on the cowlguard will always tell the year, along with the fact that it says Medalist instead of TXT. That is why you want to sell to someone that knows nothing about them! :-D

wheelchairman 01-10-2007 06:10 PM

where did you get the adaptors

club car man 01-10-2007 07:43 PM

Where's the finished pics? :-P Looks 100x better than it did! 8) 8)

Xtreme Cartz 01-10-2007 07:55 PM

Thanks for the compliments. :-D

I got the adapters from this place. :arrow:
http://www.adaptitusa.com/
They did a good job on the adapters but used a funky lug. I had a heck of a time tracking down some lug nuts to fit it! :lol: 3 Autozones didnt have the right one. :?

Hey NONO what manufacturers code on the cowl guard are you talking about? I replaced the body with a new one so it aint a medalist anymore. :-D In my experiance people like to pay for anything better than a Marathon model. No matter what you do to those the value just isnt there all though they are a tough little cart! 8)

NO NO NO E-Z-GO! 01-10-2007 08:42 PM

If you put a TXT cowlguard/dash on it, it will read TXT and the plaque will say whatever year it came off of, like my 1998s say "F 1 98" or something like that, and I was thinking it still had the Medalist cowl which would give away the year, and hurt sales. But you got all that taken care of! 8)

Xtreme Cartz 01-10-2007 08:48 PM

Yep but I still tell the year when I sell these. I aim for people looking for a good quality off road cart that wont give them any problems for a long time regaurdless of the year. I dont care if I get top dollar or not for these carts. As long as I come out just enough ahead so I can build another cart I'm happy. 8) :-D

wheelchairman 01-10-2007 10:15 PM

Quote:

Originally Posted by Xtreme Cartz
Thanks for the compliments. :-D

I got the adapters from this place. :arrow:
http://www.adaptitusa.com/
They did a good job on the adapters but used a funky lug. I had a heck of a time tracking down some lug nuts to fit it! :lol: 3 Autozones didnt have the right one. :?
! 8)


what pattern is the rhino wheel?

Xtreme Cartz 01-11-2007 03:27 PM

The bolt pattern for these wheels is 4/110. I thought I would be able to drill the holes out a little....WRONG!! :? :lol:


All times are GMT -5. The time now is 02:34 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.