ezgo dead short when connecting the negative terminal on the battery
hi im a noob here.
my problem is when i try to connect the battery i get a dead short. the cart is switched off at he ignition the forward reverse switch in neutral and the run tow switch on run. in tow position i get no short though. i also tried connecting the 2 big terminal posts on the motor to b+ and b- just see if the motor runs but also get a dead short. how could i tell if the motor is gone? also whats the function of the 2 smaller posts on the motor? aux windings to switch the direction? call me clueless help would be appreciated:oops: |
Re: ezgo dead short when connecting the negative terminal on the battery
If you have a run / tow switch the switch must always be in TOW before disconnecting the power and and again in TOW before reconnecting the power.
The smaller 10g cables on the motor connected to F1 and F2 are the field connections. Directional switching. |
Re: ezgo dead short when connecting the negative terminal on the battery
Just an idea but disconnect the two heavy leads from the motor and try your connection again. If short goes away, tada..
|
Re: ezgo dead short when connecting the negative terminal on the battery
thanks ill give it a shot
|
All times are GMT -5. The time now is 12:44 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.