Problems removing driven clutch on 98 G16
 

Im having problems removing the driven clutch on my G16 to install the torque kit. I followed the steps in the sticky to no avail. Beat the hell out of a 2x4, no dice; tried a pickle fork, no dice; tried the steering wheel puller, so far no dice. Gonna put a 1/2" impact on the puller this afternoon and see if it will pop off. Any other tricks out there?:help:

Re: Problems removing driven clutch on 98 G16
 

Try some liquid wrench not wd40 to soak and free the end up. put tension on the puller
and tap the puller bolt to shock it.

Re: Problems removing driven clutch on 98 G16
 

I'll try that too, I work for a Komatsu dealer so I get all the heavy duty stuff, sprayed some Komatsu foaming penetrating oil on it before I left for work this morning, that stuff works! Hopefully my afternoon working will be more productive than last nights's endeavors. Thanks for the tip.

Re: Problems removing driven clutch on 98 G16
 

Got it!! Put the impact on the puller, couple of bursts and she popped right off!!

Re: Problems removing driven clutch on 98 G16
 

:thumbup::thumbup:
Gota love air tools arr arr.

Re: Problems removing driven clutch on 98 G16
 

Yep, got it assemble last night, took about 15 min. to get it back together. Best 44.95 I ever spent!! Thanks for the help.