will 2011 "PH" controller work on 2007 "PQ"?
I just smoked a controller on a 2007 precedent, "PQ" cart. It is a curtis
1510A-5250 My question, is this : I have access to a 2011 "PH" cart, completly stock. Will this 2011 cart have the same controller in it, so i can rob from the 2011 and install in the 07 "PQ"?? |
Re: will 2011 "PH" controller work on 2007 "PQ"?
Nope, the IQ and Excel controllers are different
|
Re: will 2011 "PH" controller work on 2007 "PQ"?
:iagree:
|
Re: will 2011 "PH" controller work on 2007 "PQ"?
ok, thank you for that info. I guess i will send the controller off to be rebuilt.
Thanks guys! |
Re: will 2011 "PH" controller work on 2007 "PQ"?
Quote:
|
Re: will 2011 "PH" controller work on 2007 "PQ"?
Well, yes, it can be done. But, it is not a direct bolt in, you would have to do a few modifications
|
Re: will 2011 "PH" controller work on 2007 "PQ"?
Check out this write up by David -
Successfully installed Excel controller on IQ Car |
Re: will 2011 "PH" controller work on 2007 "PQ"?
I do it all the time now. We get used controllers by the truck load from Club Car and use them often. We're now unable to get used IQ controllers so we do lots of conversions. It's very simple and it works beautifully.
|
Re: will 2011 "PH" controller work on 2007 "PQ"?
Quote:
|
Re: will 2011 "PH" controller work on 2007 "PQ"?
Quote:
The harness is easy to install. Remove dash, floormat, and rear body. Lift it out and replace it with the new one. You're done |
All times are GMT -5. The time now is 11:47 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.