Yamaha part number cross reference for bolts, ect..
 

I have found a GREAT manual for my Golf Carcass project!

The big problem that I have is that the Yamaha part numbers dont give bolt size/thread pitch/length info.

Is there any place that you all know of where I can find this info? I KNOW I'm going to need a lot of Nuts & Bolts to put this project together correctly.

THANX!

Rich
The Golf "Carcass"

Re: Yamaha part number cross reference for bolts, ect..
 

Maybe this will help alittle. When a Yamaha bolt part number is (97313-08030-00) it would be a 8mm bolt by 30mm long. Some special bolts (like shoulder or washer based) can start with a special 5 didgit starting number, but the next 5 numbers will tell the size and length.

Re: Yamaha part number cross reference for bolts, ect..
 

THANX!!! That is a huge help!

I'll try that tonight...

Re: Yamaha part number cross reference for bolts, ect..
 

This isn't exactly what you are looking for, but may help you anyways. A link to hardware references. The link in the right column,Nuts & Bolts, click on Drill Sizes for Metric Taps. That will bring you to a list of common bolt sizes and thread pitches. It may help you figure out the size and thread pitch of a fastener you need.HTH

http://frentzandsons.com/Hardware%20...onsHdweRef.htm

Re: Yamaha part number cross reference for bolts, ect..
 

NOW ya tell me!!!!!:lhmo::lhmo:
Great info Dave, Thanks!

Re: Yamaha part number cross reference for bolts, ect..
 

You never asked:lhmo::mrgreen: