2010 Precedent low pro tires rub trim front wire shield?
I noticed after installing 14” low pro wheels and tires that on full turn the right side front tire is rubbing on what looks to be a wire shield. I pulled up the rubber mat and see a wire in that spot. Can I cut off this wire shield and put a flat piece of metal or plastic on instead to alleviate the tire hitting it?
|
Re: 2010 Precedent pow pro tires rub trim front wire shield?
Yes you can, I did the exact same thing to my cart and cured the problem.
|
Re: 2010 Precedent pow pro tires rub trim front wire shield?
Quote:
What tool did you use to cut this protrusion off? Do you have any pictures showing before and after shots? |
Re: 2010 Precedent pow pro tires rub trim front wire shield?
You can buy a 1" lift kit for the front end and it should alleviate the issue
|
All times are GMT -5. The time now is 02:22 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.