|
Is there any location other than the key switch to get a switched wire?
Just like the title says. 2011 precedent with excel system. I'd rather not have to run all the way up to the key switch but I will if I have to. Thanks for any info.
|
Re: Is there any location other than the key switch to get a switched wire?
no ... you can add our own switch if you want
|
Re: Is there any location other than the key switch to get a switched wire?
Could you follow the switch wire in the wiring diagram and tap it closer to the seating area? I did this on my yamaha for the converter but i dont know about the excel.
|
Re: Is there any location other than the key switch to get a switched wire?
The closest would be the light blue wire at the small post of the solenoid. If your voltage converter does not have a trigger wire, you should use a relay. Do not place a large load in the cold side of the keyswitch or you could get controller error codes.
|
| All times are GMT -5. The time now is 05:41 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.