Need location of high voltage, switched wire on new 2022 Lithium Yamaha PTV.
I'm attempting to install a DC converter to take the 48v output of the lithium battery down to 12v to connect some accessories. Ideally, the converter needs to tap onto a wire that is 'hot' only when the key is in the 'on' position. Unfortunately, the wires connected directly to the key switch carry only a 5v signal & the converter needs the full voltage to activate. These carts are so new, that there's not much information out there on 'em yet. Anyone have any ideas where I might find such a connection?
|
Re: Need location of high voltage, switched wire on new 2022 Lithium Yamaha PTV.
https://golfcars.yamaha-owners-manua...9626-A2-17.pdf
Check the wiring diagram on page 56. The PTV carts already have a voltage step down included though, so I may have linked the wrong model. If yours is a ptv model, I’d use said wiring diagram to locate your 12v hot wire and just use that to power whatever you have. |
Re: Need location of high voltage, switched wire on new 2022 Lithium Yamaha PTV.
A good converter will have a fifth Trigger wire that you connect to the key switch where the 48V power comes directly from the battery.
|
All times are GMT -5. The time now is 02:17 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.