lowering 97 ezgo
Newbie here, I have a 97 electric ezgo that Im interested in making some mods on. So far I've installed the recessed lights and a flip down rear seat. Id like to lower it some before I do a paint job. I dont want to "slam" it, just lower the stance a bit. Whats the best way to do this without dropping big bucks???:help:
|
Re: lowering 97 ezgo
don't know about the ezgo but on Yamaha we just relocate the shock mounts front and rear to drop it a little. welcome to BGW
|
Re: lowering 97 ezgo
How much does that affect the ride? I've got a yamaha rhino so the cart wont be off-road, just crusin' around the streets and campgrounds.
|
Re: lowering 97 ezgo
far as the ride on the Yamaha. no difference in the ride from just relocating the shock mounts but not sure on ezgo
|
Re: lowering 97 ezgo
You could try to find air shocks for the front and back, gonna be tough finding the right ones though.
|
Re: lowering 97 ezgo
jc whitney?
|
Re: lowering 97 ezgo
invert the leafs like on the old impalas itl scrape bottom
|
Re: lowering 97 ezgo
Thats alot of drop lol. Around 4 inches or so?Maybe when i get my gasser going i will lower the trike.
|
Re: lowering 97 ezgo
Just make some blocks. It should be pretty simple for the front and rear.
|
Re: lowering 97 ezgo
I agree with dero, I will be making some blocks for my 97 also when it gets to the point of being finsihed, Just to close some fenderwheel gap. Airshocks will just raise you, They would be nice espescially for the rear when you have passengers.
Napalaz, I have actually done this to get a picture a few weeks ago, here it is. Not drivable. http://i243.photobucket.com/albums/f...01ebay0017.jpg |
All times are GMT -5. The time now is 06:41 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.