Re: Installing HEI Ignition on 3PG Carts
Thanks for posting this
|
Re: Installing HEI Ignition on 3PG Carts
Thanks for posting this
|
Re: Installing HEI Ignition on 3PG Carts
Thank for this post. My neighbor had 2000 TXT that died. No spark. Replaced all components with no luck. Then did the HEI conversion and it’s up and running. Thanks again.
|
Re: Installing HEI Ignition on 3PG Carts
disregard should have read the threat first
Thanks |
Re: Installing HEI Ignition on 3PG Carts
Quote:
Yes, it's the same wiring. Search some of the threads. There is one brand of module that doesn't work. At least two guys have bought it with poor results. I forgot the name of it. |
Re: Installing HEI Ignition on 3PG Carts
thanks!
|
Re: Installing HEI Ignition on 3PG Carts
Thanks for this Information
|
Re: Installing HEI Ignition on 3PG Carts
This link is to a thread where the guy managed to get a 2003 four stroke 350 running on the HEI conversion. He lists the module that he used.
https://buggiesgonewild.com/showthread.php?t=180892 |
Re: Installing HEI Ignition on 3PG Carts
This is the next page of the above thread. We now have video proof that the HEI conversion will work on the pre-MCI two cylinder 4 stroke engines. https://buggiesgonewild.com/showthre...=180892&page=3
|
Re: Installing HEI Ignition on 3PG Carts
I have an 89 Marathon with no spark and am going to use your plan and install the 77 Nova system. The only question I have is what the AC voltage should I see from the pulsar coil. I am seeing around 1/2 volt ac presently and I thought I red somewhere I should see closer to 10 vac
|
All times are GMT -5. The time now is 11:49 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.