Zeva BMS settings for 72v
I asked this before, but it got overlooked because I was having other issues. I would appreciate any advice you would be willing to share. I need to set my BMS settings and don't know what some of it is, don't really know what is the best options for some of the things I do know.
This is for 10 Leaf Modules on a 72V cart that I would prefer to keep under 82V total. Pack Capacity Amp Hours Soc Warning Full Voltage Warn Current Trip Current EVMS temp warning Min Isolation Tacho PPR (not sure what to do with these that obviously don't apply) Fuel Gauge ones and Temp gauge as well BMS Min V BMS Max V Balance Threshold BMS Hysteresis BMS Min and Max temp Low Temp Chg Rest. (yes or no) Max Charge V Max Charge Current Alt Charge V Alt Charge Current Enable Precharge (yes or no) Stationary Mode (yes or no) I know thats a lot of parameters, but I appreciate any suggestions on those and any others that I didn't list. Thanks |
All times are GMT -5. The time now is 09:44 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.