Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Gas EZGO (https://www.buggiesgonewild.com/forumdisplay.php?f=15)
-   -   Need some advise with factory spindles on RXV (https://www.buggiesgonewild.com/showthread.php?t=60958)

Jammer5658 03-04-2012 09:53 AM
Need some advise with factory spindles on RXV
 
I have been Chasing a rattle in my front end of my 2008 RXV. I have finally realized it was coming from the spindle. It has enough slack in the kingpin that it is letting the spindle move in and out at the top and bottom where it mounts on the shock tower bracket. Bolt and nut that goes through kingpin was tight. Thrust washer on top of spindle looked ok. Any suggestions or updates on fixing this would be greatly appreciated. :thumbup:


All times are GMT -5. The time now is 07:09 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.