View Single Post
Old 05-26-2014, 12:36 PM   #10
tboyd20111
Not Yet Wild
 
Join Date: May 2014
Posts: 16
Default Re: DCS solenoid wont click cart stalls

well i forgot to unhook the blue wire from the solenoid before touching that post to the - on the battery and SPARK. Now nothing works. No battery indicator, no forward or backward movement, nothing. The lights still light up. Voltage from - to solenoid is 37.8 (same as battery pack) and voltage to the other side is the same unless i put the toggle switch in the tow position then voltage is 35.2. No voltage reading at any of the pins except pin 10 is 37.8. I tried jumping the solenoid like i use to to make the cart go and now that doesnt work either. Also want to mention with all this messing around with it there was a point when I touched one probe of the volt meter to - battery and the other probe to the chassis and it would read battery voltage like the chassis was hot. With it sitting overnight and putting everything back together it doesnt read like that anymore. I think im about to tow the cart with my truck and do 90 down the highway and see whats left of it!
tboyd20111 is offline   Reply With Quote