Re: Ezgo throttle testing
Newbie here so please forgive and redirect if this info is elsewhere. All upgraded everything with new motor, batteries and solenoid in older series TXT. New motor ran great for 3 weeks but then started only running about 1/2 speed with almost no torque even at full throttle. Molex connector cleaned. Batteries new as noted and all have good charge. Even checked individual cells with hydrometer. I am reading 8.8 volts across the ITS white and black blade connectors Thoughts on my apparent lack of power? Could this be the ITS? Thanks
P.S. - controller is 700 amp FSIP that is about 5 years old, all cables and F R switch upgraded and heavy duty. Solenoid is SW 200 and was upgraded due to this issue.
|