[RonP]

Ok guys. I went through the cart for hours front to rear and top to bottom.

Everything seems to be great, but have a couple things I wanted to ask about.

1 - I noticed that the way the spindles mount to the front frame, there is some play up and down. I would expect there would be some but is there some kind of spec on it?. The driver side has about .040 more up and down movement than the passenger side. Both are torqued to specs.

2 - I plan on taking all the batts out and cleaning the frame real good after I get my new cables. There doesn't seem to be a lot of corrosion so I was happy about that. What is the best thing to get back on the frame for protection? I have a can of truck bed spray I used on something else, would that be good? undercoating? or just regular black paint?

3 - I charged the Batts last night for the first time. I don't know if this is the absolute best way to check but here is what I got. About 30-45 minutes after the charger shut off I measured everything.

Total = 38.2 volts 1=6.34 2=6.39 3=6.38 4=6.38 5=6.35 6=6.33

The next morning after it sat in the could garage (about 35degrees) all night.

Total = 36.9 volts 1=6.25 2=6.15 3=6.19 4=6.17 5=6.18 6=6.18

SO does this data tell me anything?

again guys, I appreciate all the help. I am sure you all have repeated stuff for me that has been said many times.

Thanks
Ron