Re: 1996 g-14 low rpm
Well after about 10 to 15 hrs of trouble shooting I finally found it for sure.i figured it was a heat thing so I got out the wife's hair dryer and blew hot air on the module and bam had rpm but what i really found worked I un bolted it and pinched it and had rpm let go of it then low rpm I couldn't believe it I found my problem I put a light spring clamp on it runs every time.i will eventually get a new one.what it was doing is not advancing the timing when it wasn't working.i found that by putting a mark on the clutch at t.d.c. On compression stroke rigged a pointer up off the shroud when it wasn't running right it was advanced very little pinch the module and revved quick advanced back about an inch I used a timing light ill try and post pics
|