Re: 2007 fault code #6 but voltage is reading fine
Is the fault code a charger fault code or a cart fault code?? If the fault code is a charger code, cycling the run/tow on the cart will not clear it. What charger do you have?? Also it would be helpful to post individual battery voltages (to two decimal places if possible). Those new batteries need to be charged ASAP and broken in per scottyb's website. - RAY
PS-I had a Powerwise QE that I scrapped - see quote below from one of my posts:
"After quite a bit of research here's what I have found. The 6 red flash-pause-6 red flash-pause,etc. indicates that an internal circuit problem exists."
Last edited by bigstik40; 03-22-2012 at 10:23 AM..
Reason: add info.
|