View Single Post
Old 01-07-2011, 02:06 PM   #6
Not Yet Wild
Join Date: Nov 2010
Posts: 6
Default Re: 2001 EZ-GO Clicking won't go

I pulled the switch and it had burn discoloration on one side - I got parts and rebuilt and reinstalled the switch. It seemed OK no smell and works fine in Forward but I get nothing in Reverse just the clicking from the solenoid. I also tried switching the micro switches to see if one bad - see if after switching them if problem would reverse and it would go in reverse and not forward - BUT no difference still will move forward but nothing but the clicking in reverse. Any help in resolving would be great.
Thanks Joe
jwlyons is offline   Reply With Quote