Quote:
Originally Posted by rabbitreborn
Judging from the pictures I have seen of the pieces that he has that keep breaking loose, you might be better off ordering a new set of adapters from Jakes. The Spindles you already have from your stock setup, you should only need the actual drop axle and then order a new set of riser adapters from Jakes to complete the lift.
Since he is going to go to a spindle lift, it would be easiest to just swap axle between the 2 of you.
|
Yep ! Jakes wants a few bucks for those...mmm mm, but that may be
what I end up doing, anyway, Cajun Cartman..here is the axle I pulled.
I am trying to adapt a four wheeler front clip to mine this weekend, so that is
why I have it out.