View Single Post
Old 08-22-2018, 10:18 AM   #11
JerEazy
Getting Wild
 
Join Date: Aug 2018
Posts: 146
Default Re: crank seal in the clutch and fan side of a G1.

Glad you got it done! Clean the eff outta all that area!

I soaked my flywheel in carb cleaner, brushed degreaser all over the coil plate (front and back) and then gently sprayed it off with some compressed air. Then hit all the contacts with battery terminal protector.

Grease everything that moves. “Where there is grease, there isn’t water. Where there isn’t water, there isn’t rust.” I even wet sanded the crankshaft to get the corrosion off.

Some say use 2 stroke on the seal, I personally used marine grease around the edges. But either I think gets it done. And blue loc-tite those screws when you put them back in. Keeps them from vibrating out, and should help if you need to remove in the future.
JerEazy is offline   Reply With Quote