View Single Post
Old 09-15-2021, 01:50 PM   #2
crash12888
Gone Crazy
 
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
Default Re: yamaha g14 no signal to solenoid

What are you jumping on the solenoid, the two big post?
Did you check your fuse?
If that's good, using your meter on DC volts, put the positive probe on positive battery, then to each of the two small post on your solenoid.
One should be grounded and give you battery volts on meter.
If neither give volts you need to determine which is ground post and find the problem there.
If you get volts from one post then the other post is the activation or positive post and should get 12V when you push the pedal.
If you don't then you have a bad key switch, foot pedal switch or break or loose connection going to positive side of the solenoid.
crash12888 is offline   Reply With Quote