Buggies Gone Wild Golf Cart Forum - View Single Post

AGELE55 · 09-17-2021, 01:24 PM

Ok…let’s stick with what we know. The solenoids operate with power directly from the battery, but when that same power is routed through the two in line switches the solenoids don’t work.
Read my previous post about the pedal switch.
This reeks of grungy wires, or a fried switch. Ohm out the pedal switch and see what you get. Also ring out the wires from end to end and see if they’re reading high resistance. Then try your jumper from different points along the circuit, eliminating chunks of wire.

09-17-2021, 01:24 PM	#15
AGELE55 Gone Wild Join Date: Dec 2019 Location: NE Florida Posts: 245	Re: 1983 G1 ignition and starter switch woes Ok…let’s stick with what we know. The solenoids operate with power directly from the battery, but when that same power is routed through the two in line switches the solenoids don’t work. Read my previous post about the pedal switch. This reeks of grungy wires, or a fried switch. Ohm out the pedal switch and see what you get. Also ring out the wires from end to end and see if they’re reading high resistance. Then try your jumper from different points along the circuit, eliminating chunks of wire.