View Single Post
Old 09-17-2021, 08:37 PM   #23
mikeasis
Gone Wild
Yamaha
 
Join Date: Jan 2017
Location: venice
Posts: 1,807
Default Re: 1983 G1 ignition and starter switch woes

Quote:
Originally Posted by tennbamaman View Post
i got the serail number off the chassis. For sure i have not seen another box that i would suspect to be a relay. I found another 3 prong connector this afternoon that i had not found. it was dirty and it that the yellow, blue, and a black wire. i cleaned really good. checked ohms on all three and they were really low. I also made the horn work again by touching the horn hot wire to jumper positive and the horn black wire to the chassis groung.
You say horn, it’s an add on, is there lighting as well? Make sure all grounds go to battery negative not chassis. IIRC there’s only one chassis ground below the solenoids it’s a small wire that uses one of the fender bolts
mikeasis is offline   Reply With Quote