Quote:
Originally Posted by txd
1/8" toe in right? is that to the rim or the tire? i put my lift on and did an alignment with the stock wheel/tire combo. now that i have my larger tires and rims do i need to redo it to those tires? i had the stock combo at 1/8" toe in, now with the larger tires they are closer to 1/4" toe in.
|
Yes... You need to reset the toe. Your new tires should have a line that runs the circumference of the tire (from the tire mold). Use these lines to measure from. Set the toe as close to 0 as possible, always in at the front if you are not sure that you are on 0...