View Single Post
Old 10-16-2020, 12:25 PM   #23
JPonLKN
Gone Wild
 
JPonLKN's Avatar
E-Z-GO
 
Join Date: Jul 2020
Location: NC
Posts: 774
Default Re: EZGO Workhorse / Jacobsen Build

Slo,
You are asking if your front end is the same as a TXT...I'd be happy to take some measurements and share them so you can compare and we can determine if they are in fact the same.

Hoping maybe you can do me a favor...take a photo of your passenger side brake linkage with a tape measure laid along side, and another of the section of cable between the brake cable compensator clip and the bracket that holds the ends of the two brake cables. Since you have an ST 350 ish, machine, I'm trying to see if they are the same as the EZGO TXT. I can buy the passenger side brake cable for an ST, and I am hoping it is a direct replacement, only longer for my brake cable, and I can use my passenger side cable on the driver side...ending up with 10" longer cables and some room to get around engine and suspension.



Thanks
Jeff
JPonLKN is offline   Reply With Quote