View Single Post
Old 02-20-2011, 11:15 AM   #8
reinman88
Gone Wild
 
reinman88's Avatar
 
Join Date: Jan 2011
Location: Nebraska
Posts: 665
Default Re: Workhorse Front Lift Question?

Quote:
Most tie rods have enough extra threads to reach when installing a 4 inch drop axle, so yours should work. Shock extenders are available in 2" from auto parts stores. 22s should fit.
Thanks.

I really didn't want to spend a lot of money for a lift when it wasn't going to do much for rear axle clearance. But if I can get the frame up a couple inches with little or no expense, and now use 22 inch tires, that wouldn't be bad.

In your picture, is that an extra plate with the round risers welded to it? If so, why the extra plate, rather then just putting the bolts inside loose risers between the two original plates.
reinman88 is offline   Reply With Quote