Quote:
Originally Posted by scottyb
So........? Where are you going to mount the rockers? And the relays?
|
Rockers on the Dash. What relays? There are no relays in this interface. The little green board is a Solid State Relay that opens/closes the connections on the freedom plug from input from the Rockers.
Look at the pix's. One photo shows the green board wired to the Freedom Plug (red wires) and the oter side you'll see two control wires, a black and red (not shown in all the photos). Those two wires go to the dash.
The only other wires are the "Initiate" switch interface (two wires) that interrupts the Yellow wire on the Run/Tow switch via a dash mounted Normally Closed Momentary Push Button switch.