[thetoddjohnson]

Does anyone have a wiring diagram for the G29? This is turning out to be a PIA. Without a wiring diagram I can't make any sense out of what I'm observing.

I pulled both wires out of the keyswitch. There is a red/yellow, and a red/white. Using a DVM I found that there is continuity between them. Does the ignition switch "off" position complete the circuit and the "on" position breaks the circuit?

I also found that between the ignition wires (either one) to pack positive reads 48V. However, there is no continuity between the ignition wires and pack negative.

I'm really confused.

Any advice would be greatly appreciated.

TJ

I measured 48V between red/yellow and pack positive. I also measured 48V between red/white and pack positive