Re: Heavy duty leaf springs?
Update I removed the U bolts and left the leafs on the cart with the two bolts that hold the bushings. I then removed the plates to get access to the center of the leafs. My leafs were held together with a 13mm bolt in the center. I removed the bolt and pulled the bottom leaf out. Slapped it back together and I must say It does ride nicer. After all I might even remove one more leaf. So I would only have 2 leafs total. Then it would ride like a Cadillac. The only problem is the two medal rings that go around the springs wouldn't be tight to the two leafs. I would have to figure out how to either make them or modify the ones that are on them currently.
|