Buggies Gone Wild Golf Cart Forum - View Single Post - Profiling Lester Summit II charger for LiFePO4 battery

Pat911 · 10-29-2022, 03:53 PM

V is voltage setting (CV), A is amps (CC). You’ll need a DC clamp meter or a shunt based State of Charge meter to measure the current. If you don’t have either of these then just leave the current at maximum. But you MUST set the correct voltage.

10-29-2022, 03:53 PM	#26
Pat911 Gone Wild Join Date: Dec 2020 Location: Melbourne, Australia Posts: 1,947	Re: Profiling Lester Summit II charger for LiFePO4 battery V is voltage setting (CV), A is amps (CC). You’ll need a DC clamp meter or a shunt based State of Charge meter to measure the current. If you don’t have either of these then just leave the current at maximum. But you MUST set the correct voltage.