G1 Carb Issue
Guys I rebuilt my yamaha G1 from top to bottom. It runs fine but im still having a few small issues with what seems to be the carb.
One issue is that on the side of the carb it has a small little pipe that im assuming is an overflow. It drips gas when its opened to full throttle. Is this common or is there something missing? And just so you know i have been through the carb several times and all jets are clean.
Also it seems like it may be starving for air, I can take the air filter off and it seems to run like it should, i put the pipe back on and it seems to run fine but just not open up like it does without the airfilter pipe which leads me to believe its not breathing properly. I looked at the main jet and it had 32A stamped on the jet.
Lastly, off subject, have any of you put the heavier torque spring in your secondary clutch? if so does it affect top speed or just help with starting and pulling?
Thank you all for the knowledge you provide to those of us who are new and learning.
|