View Single Post
Old 11-25-2009, 09:59 PM   #2
tonyton
Gone Wild
 
tonyton's Avatar
E-Z-GO
 
Join Date: Jan 2009
Location: Alabama
Posts: 2,120
Default Re: Pulser coil ohm question

Hey,
The technicians manual say the resistence is 20- 25 ohms on the 200 or 300 ohm scale on the VOM. That's a bench test, motor off. Check it again. The two leads to the plug to the pulser coil. Outside of that range is no good!
tonyton is offline   Reply With Quote