View Single Post
Old 08-16-2012, 04:45 PM   #1
donetheconversion
Getting Wild
 
donetheconversion's Avatar
Yamaha
 
Join Date: Oct 2010
Location: Holland, Michigan
Posts: 112
Default g-2 charging problem

my issue with my g2 is that at full throttle (taking voltage from the battery) the meter reads 12.3 volts and when i throttle it down it lowers around 11 something. so the next thing i did was redid the test but at the starter/generator and same thing.. i just replaced the brushes in the starter generator before the test because thats what i thought was wrong. so my first question is does the "generator side" use the same brushes as the "starting side"? i have read about the vr going bad, but i ruled that out by hooking the meter right up to the generator..right?

thanks
donetheconversion is offline   Reply With Quote