View Single Post
Old 05-26-2014, 05:39 PM   #22
sportcoupe
Gone Wild
 
sportcoupe's Avatar
E-Z-GO
 
Join Date: Sep 2012
Location: Savannah, GA
Posts: 2,760
Default Re: Long Travel lift front & rear, Lithium powered TXT build

Rotated the battery pack and mounted it. I turned it for a couple reasons. Room to add additional batteries if desired (would require relocation of charger and aux battery, easy) and easier access to connections.

I also wanted to keep the left side under drivers seat open for storage so I mounted charger behind lithium pack and aux battery. This also keeps the weight more centered, can't hurt.

Here's pictures everyone likes. I used J-bolts to mount the battery pack to the threaded rods that hold pack together. I used heat shrink on both the threaded rod end and J-bolts so there wouldn't be wear on thread to thread contact.

Aux battery is mounted using a large stainless steel hose clamp with heat shrink over it too for grip. The battery is solid mounted.

.
Attached Images
File Type: jpg image26.jpg (171.2 KB, 0 views)
File Type: jpg image27.jpg (158.3 KB, 0 views)
File Type: jpg image28.jpg (180.0 KB, 0 views)
sportcoupe is offline   Reply With Quote