Buggies Gone Wild Golf Cart Forum - View Single Post - DIY

Canine_Rescue_Pilot · 12-05-2012, 10:32 PM

Techraid... Speedchaser is right. Just let it complete it's full charge.
Your OBC is fine, and does not need to be changed for this at all. (read original story).

That high-voltage/low current float at the end of every charge is intentional. This is where the charger is tapering with a slightly higher voltage to prevent battery stratification. Always let it fully complete every charge cycle.

12-05-2012, 10:32 PM	#27
Canine_Rescue_Pilot Getting Wild Join Date: Dec 2011 Location: Dunedin, FL Posts: 78	Re: DIY - 4 x 12v to 6 x 8V Conversion (Part 1) Techraid... Speedchaser is right. Just let it complete it's full charge. Your OBC is fine, and does not need to be changed for this at all. (read original story). That high-voltage/low current float at the end of every charge is intentional. This is where the charger is tapering with a slightly higher voltage to prevent battery stratification. Always let it fully complete every charge cycle.