Re: RXV Leaf Gen 1 to Leaf e+ Upgrade Build Thread
Batteries test-fit with base brackets installed. BMS built. These are the old CleanPowerAuto mini BMS boards that are designed to mount directly to each cell via a ring terminal. De-soldered the ring terminals from the circuit boards, and re-soldered the wires from the provided battery pigtail plugs, plus jumpers wires to allow each circuit board to monitor the respective cell’s voltage. Mounted the whole shebang in a project box with a clear top so you can see the flashing LEDs on the boards that give information on cell status. Also it looks cool at night.
|