Quote:
Originally Posted by tia1971
What I notice that may be the problem is the diagram "d" has the 12 volt cables connected to a different battery that I have mine connected to. I have attached some photos of the way I have connected the batteries and pictures of the golf cart. Sorry it is so dirty but it has been sitting up for a while and I can not drive it to be washed. :-)  |
It is not a TXT Cart it is a DCS cart with the run/tow switch on the controller cover. Before you change batteries, the switch needs to be in the tow/maint mode.
Figure "D" is correct for your cart, make sure yours is the same when you're done.
You have the cart wired correctly. The smaller wire that shows white is in the correct spot and should be on the + terminal of the first battery and the smaller black wire on the other side should be on the - terminal of the last battery. These small white and black wires run back to the plug and are connected to the battery charger when you plug it in. The voltage reading across these 2 batteries (first and last) should be 38.4v when fully charged.
Don't worry about the part of the drawing that has the 12v cables, they are for accessories like lights etc.