[Chugger]

So my cart is lifted, a lot probably 6+ “ with a long arm kit. I drained and changed the oil this weekend. I jacked the back of the cart and deflated front suspension to get the motor and skid plate level when draining. I filled and checked the oil level at 1.5qt and it was very slightly 1/4” Over the full line. I then removed the jacks and inflated front suspension to where cart floor board was level to ground and oil measured exactly to the full line. Very little difference when the cart was level vs when the engine was level. At least now I know when the cart is level the oil should read full on the dip stick