Quote:
Originally Posted by camaroluvz28
what your calling a spacer is prob an oil seal for the axle, there should be another snap-ring behind the bearing holding this in...It should feel like a spacer but have a rubber coating over it. If not the only other spacer would be the one scotty is talking about..
|
I never thought of the oil seal as a spacer
Set it in the tube nice and square by driving it in with a big socket, It think 1-3/8th or close fits right in, put a 6" extension on it and tap with a hammer to drive the seal just past the C clip indent. Put a little oil or grease on the seal before inserting the axle. And do the same to the axle where the seal rides.