Quote:
Originally Posted by cbordea
I've got some bearings on the way. At first I thought I could get the axle out easily and hopefully have it fixed yesterday afternoon. The axle is being a pain to get out so I've got to figure out how to get the axle out.
My axle isn't threaded to get any kind of slide hammer in there. I think we have figured out how to make rudimentary slide hammer and make it work. I'll keep you posted.
|
Slide the drum back on with the inside facing out and put the nut on the end of the axle. Then use a dead blow hammer to to hit the face of the drum to drive the axle out.
There are more instructions in this thread.
http://www.buggiesgonewild.com/elect...eriment-3.html
Hope that helps you.