Re: new batteries installed but now doesn't run
Since the reverse beeper is no longer working and the solenoid is no longer clicking, you are missing the battery pack voltage (B+) that goes to the microswitches on the F/R assembly.
There is a red jumper wire that connects the two microswitches together and on one of the two terminals that jumper wire is attracted to is another red wire that originally went to the smaller of the three wires coming out of the charger receptacle (Reed switch), but might have later been attached to anywhere B+ can be obtained 100% of the time.
Get B+ to the microswitches somehow and the cart ought to work.
Attached is a schematic of a series cart with the solenoid activation circuit highlighted
|