View Single Post
Old 03-22-2021, 08:32 PM   #1
Nflight
Not Yet Wild
 
Join Date: May 2020
Posts: 13
Default 1995 Club Car Villager Complete Rewire

So guys and gals, I have a ‘95 CC Villager that I am totally rebuilding. Wanted to see if any of you have any experience totally rewiring and cleaning up the wiring. Serial number starts with D9547 so I’m pretty sure that’s what it is. I wanted to simplify it a little so I completely removed the OBC. I have also removed the FNR slider and installed a SW202 reversing contactor. It had a newer main solenoid and I am using the original Curtis 1204-411 controller. I replaced all the high voltage wiring with 2 gauge and any other wiring is 14 gauge. I have also added a relay timer per Sergio’s drawing. Currently everything works just like it should. I am a little nervous about totally rewiring the cart and getting rid of all the little micro switches but so far it seems fine. Have any of y’all done anything similar? Any suggestions or comments that I should be aware of?
Nflight is offline   Reply With Quote