94 Marathon Project
Finally finished my summer project.It's a 94 marathon with a diamond plate body. I removed the body and welded all the holes that had been drilled in it over the years. Next I sand blasted it and primed it with zinc chromate primer. The tail gate was missing so I fabricated up one out of 3/16 diamond plate and square stock. I used valspar paint with hardener from tractor supply. The bed is done inside with hurculiner roll on bed liner.I also put on a warner 1500 pound push pull linear actuator to lift the bed. The trailer hitch is a 2 inch receiver type.The lift is a 4 inch by Jakes with 22 tires with offset rims. I hope this build measures up to the other builds I see on buggies gone wild...............
|